OpenBSD 4.4-current (GENERIC) #0: Sun Aug 24 12:25:58 CEST 2008
    weerd@rosti:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1073115136 (1023MB)
avail mem = 1029218304 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/20/03, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xfd8f0 (31 entries)
bios0: vendor Compaq version "68P4F v2.49 F.0F" date 02/20/2003
bios0: Compaq Evo N610c
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 95%
apm0: AC on, battery charge high
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf08c0/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf50a0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CAM LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0x60000000, size 0x10000000
radeondrm0 at vga1 ATI Radeon LW RV200 Mobility 7500 M7(0), 1.29.0 20080613
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
"AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 4 function 0 not configured
cbb0 at pci2 dev 6 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 6 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VM" rev 0x42, i82562: irq 10, address 00:08:02:93:49:da
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ohci0 at pci2 dev 14 function 0 "NEC USB" rev 0x41: irq 10, version 1.0, legacy support
ohci1 at pci2 dev 14 function 1 "NEC USB" rev 0x41: irq 10, version 1.0, legacy support
ehci0 at pci2 dev 14 function 2 "NEC USB" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit timer at 3579545Hz: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1200VE-00KWT0>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <Compaq, DVD-ROM GDR8081N, 0013> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, ICH3 AC97
ac97: codec id 0x41445363 (Analog Devices AD1886A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efcd netmask efcd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R100 Microcode
info: [drm] writeback test succeeded in 1 usecs
extent `drmext' (0x40000000 - 0x7fffffff), flags=2<NOCOALESCE>
     0x40012000 - 0x48011fff
     0x48012000 - 0x48112fff
     0x48113000 - 0x48113fff
     0x48114000 - 0x48313fff
     0x48314000 - 0x487f3fff
extent_free: start 0x40012000, end 0x42011fff
panic: extent_free: region not found
Stopped at	Debugger+0x4:	leave	
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb>    PID   PPID   PGRP    UID  S       FLAGS  WAIT          COMMAND         
 13330      1  13330    864  3     0x44080  nanosleep     halt            
  5283  10953   5283      0  2           0                xdm             
*32364  10953  32364     35  7     0x44100                Xorg            
 14798      1  14798    864  3      0x4082  ttyin         ksh             
 10953      1  10953      0  3        0x81  pause         xdm             
 29325      1  29325      0  3        0x80  mfsidl        mount_mfs       
    18      0      0      0  3    0x100200  bored         crypto          
    17      0      0      0  3    0x100200  aiodoned      aiodoned        
    16      0      0      0  3    0x100200  syncer        update          
    15      0      0      0  3    0x100200  cleaner       cleaner         
    14      0      0      0  3    0x100200  reaper        reaper          
    13      0      0      0  3    0x100200  pgdaemon      pagedaemon      
    12      0      0      0  3    0x100200  pftm          pfpurge         
    11      0      0      0  3    0x100200  usbevt        usb2            
    10      0      0      0  3    0x100200  usbevt        usb1            
     9      0      0      0  3    0x100200  cardslotev    cardslot1       
     8      0      0      0  3    0x100200  cardslotev    cardslot0       
     7      0      0      0  3    0x100200  usbtsk        usbtask         
     6      0      0      0  3    0x100200  usbevt        usb0            
     5      0      0      0  3    0x100200  apmev         apm0            
     4      0      0      0  3    0x100200  bored         syswq           
     3      0      0      0  3    0x100200                idle0           
     2      0      0      0  3    0x100200  kmalloc       kmthread        
     1      0      1      0  3      0x4080  wait          init            
     0     -1      0      0  3     0x80200  scheduler     swapper         
 15361  32364  32364      0  5     0x42100                Xorg            
ddb> Debugger(d07dbb1c,48314000,dcfcad30,42011fff,40012000) at Debugger+0x4
panic(d06f9925,40012000,42011fff,0,0) at panic+0x55
extent_free(d19bfd60,40012000,2000000) at extent_free+0x57
drm_rmmap(d19d3800,d1ad6080,2,0) at drm_rmmap+0x67
drm_lastclose(d19d3800,91,9,d19d3998,dcfcae18) at drm_lastclose+0x186
drmclose(5801,3,2000,d7a0e6c4) at drmclose+0x179
spec_close_clone(dcfcae18,d79d8c3c,20042,d7a0e6c4,d07dc3c8) at spec_close_clone+0x2f
VOP_CLOSE(d79d8c3c,3,d7bb5230,d7a0e6c4,d79d8c3c) at VOP_CLOSE+0x34
vn_close(d79d8c3c,3,d7bb5230,d7a0e6c4,0) at vn_close+0x35
vn_closefile(d7a2d9fc,d7a0e6c4,5800,0,d7a24a6c) at vn_closefile+0x1c
closef(d7a2d9fc,d7a0e6c4,7e61e000,0,d7a02008) at closef+0x101
sys_close(d7a0e6c4,dcfcaf68,dcfcaf58,0,157b) at sys_close+0x3e
syscall() at syscall+0x24e
--- syscall (number 6) ---
0x83afa19:
ddb> rebooting...
OpenBSD 4.4-current (GENERIC) #0: Sun Aug 24 12:25:58 CEST 2008
    weerd@rosti:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1073115136 (1023MB)
avail mem = 1029218304 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/20/03, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xfd8f0 (31 entries)
bios0: vendor Compaq version "68P4F v2.49 F.0F" date 02/20/2003
bios0: Compaq Evo N610c
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 95%
apm0: AC on, battery charge high
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf08c0/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf50a0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CAM LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0x60000000, size 0x10000000
radeondrm0 at vga1 ATI Radeon LW RV200 Mobility 7500 M7(0), 1.29.0 20080613
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
"AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 4 function 0 not configured
cbb0 at pci2 dev 6 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 6 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VM" rev 0x42, i82562: irq 10, address 00:08:02:93:49:da
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ohci0 at pci2 dev 14 function 0 "NEC USB" rev 0x41: irq 10, version 1.0, legacy support
ohci1 at pci2 dev 14 function 1 "NEC USB" rev 0x41: irq 10, version 1.0, legacy support
ehci0 at pci2 dev 14 function 2 "NEC USB" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit timer at 3579545Hz: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1200VE-00KWT0>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <Compaq, DVD-ROM GDR8081N, 0013> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, ICH3 AC97
ac97: codec id 0x41445363 (Analog Devices AD1886A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efcd netmask efcd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R100 Microcode
info: [drm] writeback test succeeded in 1 usecs
